About Us

Provide advanced protection for your entire vehicle! The Engine, manual and automatic transmission, power steering, and differential. Replacement parts are expensive, extend their life with polydyn TX7. These are the most unique, superior treatments you can buy. There simply is no better insurance to add life to your entire vehicle. Does Polydyn TX7 really work? Ask the professionals. Some of the biggest names in stock car and drag racing, NASCAR, NHRA, IHRA, World of Outlaws, SCCA, IndyCar,...

read more

Provide advanced protection for your entire vehicle! The Engine, manual and automatic transmission, power steering, and differential. Replacement parts are expensive, extend their life with polydyn TX7. These are the most unique, superior treatments you can buy. There simply is no better insurance to add life to your entire vehicle. Does Polydyn TX7 really work? Ask the professionals. Some of the biggest names in stock car and drag racing, NASCAR, NHRA, IHRA, World of Outlaws, SCCA, IndyCar, MONSTERTRUCK, Boat Racing and many more! Polydyn TX7 Engine Treatment and TX7 High Mileage Engine Treatment is a revolutionary polymer based engine treatment that coats vital engine parts reducing friction and heat. Polydyn TX7 engine treatment and TX7 High Mileage Engine Treatment can add years to the life of your engine, increase its efficiency, and reduce maintenance costs. The dramatic reduction of friction and parasitic drag inside the engine allows it to develop more power with the same amount of fuel, thus increasing fuel efficiency.

This works by burnishing TFE particles into the irregularities of the metal surfaces — where you once had metal to metal, you now have TFE to TFE. This reduces metal interface friction, heat build-up and increases efficiency. Polydyn TX7 Engine Treatment can be used in any engine new or old — even diesel engines. In a new engine it can be added as soon as the recommended break in period has been achieved, usually 4,000 to 7,000 miles or at the first recommended oil change. In an older engine, simply add during any routine oil change. It dramatically restores power in older, higher mileage engines and reduce oil consumption. TX7 is recommended for every oil change with a 80%/20% ratio. 80% good high quality motor oil to 20% PolyDyn TX7 Engine Treatment or TX7 High Mileage Engine Treatment.

read less

Only excessive and constant rubbing will cause TFE erosion to occur. Unlike other engine treatments, TX7 particles are ground to a fraction of a micron allowing them to pass through any filtration system while other engine treatments get trapped in oil filters never making it to the engine. With PolyDyn TX7 unique suspension process, the TFE particles stay in suspension and will not build up on themselves in critical areas — so it will not clog oil lines, oil ports, or oil filters. TX7's TFE...

read more

Only excessive and constant rubbing will cause TFE erosion to occur. Unlike other engine treatments, TX7 particles are ground to a fraction of a micron allowing them to pass through any filtration system while other engine treatments get trapped in oil filters never making it to the engine. With PolyDyn TX7 unique suspension process, the TFE particles stay in suspension and will not build up on themselves in critical areas — so it will not clog oil lines, oil ports, or oil filters. TX7's TFE bonding takes place at friction wear points regardless of engine temperature. Experience the difference today!

TX7 will improve the performance properties of the engine oil including:

1. BETTER OIL FILM STRENGTH under adverse conditions, such as stop and go traffic or high ambient temperatures (hot days) when the engine is stressed.

2. WEAR REDUCTION is achieved by burnishing the polymer on the moving parts of the engine. This polymer is a soft and easily transferable synthetic lubricant material. As an engine runs this polymer will attach itself to the moving parts of the engine through a burnishing process depositing polymer on high friction contact points and surface voids throughout the engine. When this process occurs metal to metal contact within the engine is greatly reduced. This reduction occurs because this polymer attracts oil to itself and the metal surfaces that it has burnished to and the lubricant film between the moving parts is significantly enhanced. Oil analysis of vehicles that have used TX7 engine treatment show a reduction of soluble wear metals between 50% to 90%.

read less

These reductions equate to tremendous increase of the life of the moving components of the engine. Another benefit from the use of TX7 besides durability is efficiency. The combination of TX7 ingredients reduces friction between the moving parts, keeping the oil film in place at all times and allowing the engine to run smoother and with less energy wasted. A motor that uses less energy to perform the task of moving the vehicle can and most times show improvement in fue leconomy. One of the ...

read more

These reductions equate to tremendous increase of the life of the moving components of the engine. Another benefit from the use of TX7 besides durability is efficiency. The combination of TX7 ingredients reduces friction between the moving parts, keeping the oil film in place at all times and allowing the engine to run smoother and with less energy wasted. A motor that uses less energy to perform the task of moving the vehicle can and most times show improvement in fue leconomy. One of the big questions people ask is "Can I use TX7 every oil change?" The answer is YES and if the vehicle is driven hard or used continuously the added protection from TX7 will enhance the useful life of the engine. "Can TX7 be used in older engines with high mileage?" The answer is again YES. Older engines can have issues with parts that have sticking issues or not good mechanical interaction and TX7 can free up these problems and bring back renewed performance. "Can TX7 be used in Diesel powered cars or trucks?" YES, TX7 is improving the lubricant system in any vehicle. Much of the performance information developed about TX7 benefits has come from our work with the racing community. These automobiles perform their duties at very high speeds, where high loads on the engines, very high temperatures, oil pressures and oil film strength are most important to the durability, efficiency and performance of the race. These results which are outstanding have transferred to the cars and trucks used on roads and highways of today. It is with great pride that we offer to you the best engine treatment on the market today, PolyDyn TX7 Engine Treatment "Can TX7 be used with synthetic oils?" Absolutely, in fact the addition of TX7 to synthetic oil is very important with increased oil change intervals there is a greater chance of contamination and viscosity breakdown. PolyDyn TX7 maintains film strength of the oil protecting internal engine components.

read less

Polymer Dynamics, Inc

11211 Neeshaw Dr,
Houston, TX 77065

Business: 888-765-9396

                888-POLYDYN

Local: 281-894-6382

Contact Us

Send Message